Split solar water heater, solar collector:
Detailed Description
The separate pressurized solar water heater compose of solar collector, storage tank,

Controller, working station and installation parts.

Working principle:
1) When the discrepant temperature of the solar collector and water tank reaches
The set value, the controller shall start the circulation pump automatically
2) The circulation pump makes heat-conducting liquid circulate automatically
3) The heat-conducting liquid transfers heat to water by heat exchanger in
The water tank
4) In case the temperature of the water tank does not reach Tmax, then
Start the auxiliary heating device
5) If discrepant temperature of the collector and the water tank does not reach the
Set value, the circulation pump shall be shut automatically
Feature:
1) Collector separates with the storage tank. The tank can be put anywhere
Of the house
2) And the collector can be put on both tilted roof and flat roof
3) Module design, arbitrary combination, harmony with the building perfectly
4) Intelligent control and automatic operation
5) Anti-freeze: No water inside the tubes when it works
6) The system controller has the anti-freezing function is that the temperature
Circulation will operate while it reaches the fixed temperature
7) Multifunction: Bathing, washing, domestic heating
8) Workable at anytime and enjoyable

Outer packing:
Carton
Vacuum tube solar water heater:
1. Tank
Inner tank: SUS304 ( food grade) stainless steel, argon welding technology
Outer tank: Colored steel sheet / pearlite sheet / silver glitter sheet
Insulation: Polyurethane foaming
Hear retention: 72h
Tank capacity: 98L-300L
2. Vacuum Tube solar water heater:
Size: ¦µ47mm*1500mm, φ47mm*1800mm, φ58mm*1800mm
Numbers of tubes: 15pcs, 16pcs, 18pcs, 20pcs, 24pcs, 30pcs
Hail resistance: 25mm
3. Bracket frame:
Material: Galvanized steel sheet
Angle: 38 - 45 degree
Solar collector:
WORKING PRINCIPLE

Solar thermal collector (by vacuum tube with copper heat pipe inside or flat panel) gathers heat energy from sunshine and transfers to cold water inside of tank via copper coiler exchanger. There is frostproof liquid in heat pipe and whole system pipeline which flew by circulation pump.

SPECIFICATION

Item No.: EM-C01
Header tube: Seamless copper TU1, ¦µ22*δ1.2mm
Outer manifold: Aluminium alloy, δ2.0mm
Frame: Aluminium alloy, δ1.6mm
Insulation: Polyurethane frothing, δ40~50mm
Vacuum tube: Tri-elements coating, copper heat pipe
Inside, 58X850mm
Copper heat pipe: Δ0.6mm
Logo: OEM sticker
Specification: 15 / 20 / 25 / 30 tubes
Daily output: 150/200/250/300L (G=1000W/m2)